Construction insulation nails construction building insulation nail construction steps

How much do we know about building materials? There are many things we don't know when we buy building materials. Friends who don’t understand architecture have this feeling! So what do we know about building insulation nails? What is the role it plays in building a house? Today, Xiaobian will take a look at the role of construction insulation nails and construction. Steps! Hope to help friends who are worried about building materials.

Building insulation nail function:

Widely used in the construction and decoration, the anchoring aspect of the wall insulation house. It has anti-aging, anti-temperature sudden change, anti-corrosion, cold and heat resistance; high bearing capacity, high pressure bearing, good tensile performance; not easy to deform, moisture, vibration, and good thermal insulation after loading. Easy to install, no special installation tools are required. The galvanized screw solves the corrosion problem well, has good durability, and has low heat transfer performance of nylon material. There is no cold bridge in winter, which is energy efficient. According to the wall material and the material of the anchored external wall, it is roughly divided into solid wall insulation nails, special insulation nails for hollow bricks, special insulation nails for steel mesh and large molds.

Building insulation nail use steps:

1. Positioning: After the insulation board is pasted on the wall, determine the anchor point position;

2. Drilling: through the insulation board already in place, drilling according to the specified size (Note: the actual depth of the wall should be above 7CM);

3. Engagement: the shaft of the heat-insulating nail is passed through the heat preservation tray, so that the four ribs of the heat-insulating nail are engaged with the heat-insulating disc;

4. Implantation: insert the nail tube directly into the drilled nail hole until the heat preservation plate is tightly attached to the heat insulation board;

5. Knock-in: Knock the matching plastic nail into the nail tube with a hammer (the plastic nail should be parallel with the insulation board).

Precautions for the use of building insulation nails:

The sudden drop in temperature has made people realize that autumn is about to pass and winter is coming soon. At this time, the market for insulation nails is booming, and sales of fixed nails are in full swing, but manufacturers should also pay attention to safety issues in the production process.

The production materials of the insulation nails are mostly aluminum metal, and the size of the nails is relatively small, and the edges of some anchors are relatively thin, so workers must pay attention to personal safety problems in the production process. Wearing wool or rubber gloves during production to prevent scratching of the anchor by hand. If you need to use a variety of tools in production, in addition to paying attention to the safety of the tools, workers should also pay attention to the tools not to leave scratches on the surface of the anchor, which will affect the effect of insulation construction.

Insulation nails are required in various insulation constructions. The difference in environment and other conditions has resulted in different insulation anchors of specifications, models, shapes, etc. Therefore, in the production process, it is necessary to pay attention to the production of anchors according to the requirements of orders or design drawings. The products produced are not suitable and waste materials.

The above is the construction insulation nail function and construction steps introduced by Xiaobian today. The small insulation nail is very important to the house, so we must do more when we buy. To understanding. For more information, please stay tuned to the renovation home.